Juniper Networks Junos OS
Junos OS and Junos OS Evolved: Malformed OSPF packets cause rpd memory disclosure or service disruption when link-local TE processing is used
Edge device · Router / network deviceknown edge product: Juniper Networks Junos OS Junos OS and Junos (high confidence)
An Improper Validation of Specified Quantity in Input vulnerability in rpd of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent OSPF peer to disclose rpd memory or cause a rpd crash via a malformed OSPF packets.
Affected versions and mitigation
From the CVE record and the vendor's references.Affected
- < 23.2R2-S7.7
- >= 23.4, < 23.4R2-S8.13
- >= 24.2, < 24.2R2-S5.5
- >= 24.4, < 24.4R2-S5
- >= 25.2, < 25.2R2-S2
- >= 25.4, < 25.4R1-S3
- >= 26.2, < 26.2R1-S2
Fixed in 23.2R2-S7.7, 23.4R2-S8.13, 24.2R2-S5.5, 24.4R2-S5, 25.2R2-S2, 25.4R1-S3, 26.2R1-S2
- < 23.2R2-S7.7-EVO
- >= 23.4, < 23.4R2-S8.11-EVO
- >= 24.2, < 24.2R2-S5.6-EVO
- >= 24.4, < 24.4R2-S5-EVO
- >= 25.2, < 25.2R2-S2-EVO
- >= 25.4, < 25.4R1-S3-EVO
- >= 26.2, < 26.2R1-S2-EVO
- 23.4X100
- >= 25.2X100, < 25.2X100-D35-EVO
- >= 25.4X300, < 25.4X300-D40-EVO
Fixed in 23.2R2-S7.7-EVO, 23.4R2-S8.11-EVO, 24.2R2-S5.6-EVO, 24.4R2-S5-EVO, 25.2R2-S2-EVO, 25.4R1-S3-EVO, 26.2R1-S2-EVO, 25.2X100-D35-EVO, 25.4X300-D40-EVO
Mitigation
The following software releases have been updated to resolve this specific issue: Junos OS: 23.2R2-S7.7, 23.4R2-S8.13, 24.2R2-S5.5, 24.4R2-S5, 25.2R2-S2, 25.4R1-S3, 25.4R2, 26.2R1-S2, 26.2R2, 26.4R1, and all subsequent releases. Junos OS Evolved: 23.2R2-S7.7-EVO, 23.4R2-S8.11-EVO, 24.2R2-S5.6-EVO, 24.4R2-S5-EVO, 25.2R2-S2-EVO, 25.2X100-D35-EVO, 25.4R1-S3-EVO, 25.4R2-EVO, 25.4X300-D40-EVO, 26.2R1-S2-EVO, 26.2R2-EVO, 26.4R1-EVO, and all subsequent releases. Note: For Junos OS releases 23.2, 23.4, and 24.2, and Junos OS Evolved releases 23.2-EVO, 23.4-EVO, and 24.2-EVO, specific respins have been referenced. Previously published versions of these releases have been rebuilt to resolve the security vulnerabilities identified in this advisory.
Workaround
If OSPF packet processing on an enabled interface isn't needed, but it has just been configured so that it's added to the LSDB, ensure it's configured as 'passive': [ protocols ospf area <area> interface <interface> passive ] The rpd crash only occurs with [ protocols ospf traceoptions flag lsa-update detail ] configured, so removing that line will prevent this.
References
- Vendor advisory supportportal.juniper.net/JSA112187
Timeline
Days relative to CVE publicationNo public PoC found yet; not in CISA KEV.
PoC repositories
Found on GitHub.No PoC repositories found yet.