PoC Monitor
← All CVEs
CVE-2025-36254published 19 Aug 2026 21:22 UTCData: JSON · API

IBM DS8A00 (R10.0 - R10.1)

DS8900F and DS8A00 Authentication Bypass

Edge device · Device firmwarehardware or firmware CPE: ibm ds8900f_firmware (medium confidence)

IBM System Storage DS8A00 10.1.3.0 through 10.11.35.0 and IBM DS8900F 89.40.83.0 through 89.44.25.0 could allow an attacker to bypass security authentication due to improperly encoding of DSCLI command output to obtain sensitive information or cause a denial of service.

First public PoC None yetno public PoC found
Public PoCs00 on GitHub
CVSS7.4high · scored by CNA · CWE-116
CISA KEV Not listednot known exploited

Affected versions and mitigation

From the CVE record and the vendor's references.

Affected

IBM DS8A00 (R10.0 - R10.1)
  • >= 10.1.3.0, <= 10.11.35.0
IBM DS8900F (R9.4)
  • >= 89.40.83.0, <= 89.44.25.0

Mitigation

IBM strongly recommends addressing the vulnerability now.  Refer to https://www.ibm.com/support/pages/ds8000-code-recommendation for instructions on how to upgrade the Microcode Bundles listed below and other information. * DS8A00 fixes are delivered in Microcode Bundle 10.11.34.1 and 10.12.39.0 * Note: Customers currently on 10.11.34.0 may update to 10.11.34.1. This is an HMC-only update and does not require a full code update. * DS8900F fixes are delivered in Microcode Bundle 89.44.17.1, 89.44.25.1, 89.44.26.0 and 89.45.10.0. * Note: * Customers currently on 89.44.17.0 may update to 89.44.17.1. This is an HMC-only update and does not require a full code update. * Customers currently on 89.44.25.0 may update to 89.44.25.1. This is an HMC-only update and does not require a full code update. * 89.44.26.0 is full code update.

Workaround

DS8900F and DS8A00 commonly known as DS8K is installed in client data center and clients control access to the system. DS8K offers multiple security features like LDAP, Multi-factor authentication, audit logging etc., that allows clients to control and audit personnel access to their DS8K. In addition, DS8K has implemented IBM approved challenge-response system to control IBM service personnel accessing the system either locally or remotely. So, a malicious attacker must meticulously bypass multiple layers of authentication by exploiting known open-source vulnerabilities to gain access to DS8K. The first step would be gaining access through the client infrastructure. While the issue must be mitigated at the earliest, it doesn’t pose an immediate vulnerability due to existing access controls implemented in DS8K. In addition, DS8K supports deployment of code fixes either via remote code load process or locally by IBM personnel. DS8K clients can deploy code fixes too.

References

Timeline

Days relative to CVE publication
-2t=0+2+4+6+8CVE published19 Aug 2026 · t = 0

No public PoC found yet; not in CISA KEV.

PoC repositories

Found on GitHub.

No PoC repositories found yet.