{
  "id": "CVE-2026-79982",
  "url": "https://poc.griffinguard.io/cve/CVE-2026-79982",
  "published_at": "2026-10-23T19:56:19.432Z",
  "title": "Out-of-bounds write in the USB Bluetooth HCI transport class when a controller-to-host HCI packet exceeds the bulk endpoint maximum packet size",
  "vendor": "zephyrproject",
  "product": "zephyr",
  "cvss": {
    "score": 8.8,
    "source": "cna",
    "vector": "CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H"
  },
  "kev": {
    "in_kev": false,
    "added_at": null,
    "days_after_publication": null
  },
  "first_poc": null,
  "poc_repo_count": 0,
  "exploit_count": 0,
  "suspicious_repo_count": 0,
  "edge_device": null,
  "description": "The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf-\u003edata, bt_buf-\u003elen) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool.\n\nThe device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path through LE Extended Advertising Report events, which the controller fragments only to CONFIG_BT_BUF_EVT_RX_SIZE. In the stock configuration the overflow is already reached without any radio traffic: the mandatory Read Supported Commands command-complete event is 70 bytes and overruns the 64-byte slot by six bytes on every host initialization.\n\nBecause net_buf_add_mem() validates tailroom only through an assertion unless CONFIG_NET_BUF_HARDENING is enabled, builds with CONFIG_ASSERT=n — the usual production setting — silently corrupt memory adjacent to the USB buffer pool with attacker-chosen contents, which on a target without memory protection between subsystems can lead to arbitrary code execution. Builds with assertions enabled fail the assertion instead and panic, giving a remotely triggerable denial of service. The fix introduces a separate bt_hci_tx_pool sized to MAX(BT_BUF_ACL_RX_SIZE, BT_BUF_EVT_RX_SIZE) for the controller-to-host direction while leaving the host-to-device pool at the endpoint packet size, which is already bounds-checked during reassembly.",
  "cwe": "CWE-787",
  "cvss_by_source": {
    "cna": 8.8
  },
  "repos": [],
  "remediation": {
    "affected": [
      {
        "vendor": "zephyrproject",
        "product": "zephyr",
        "ranges": [
          "\u003e= 3.3.0, \u003c 4.3.2",
          "\u003e= 4.4.0, \u003c 4.5.0"
        ],
        "fixed_in": [
          "4.3.2",
          "4.5.0"
        ]
      }
    ],
    "upgrade": [
      "Upgrade zephyr to 4.3.2 or 4.5.0 or later."
    ],
    "references": [
      {
        "kind": "Patch",
        "url": "https://github.com/zephyrproject-rtos/zephyr/commit/0419defd2391652edc27689d206fcd9c48439d4a"
      },
      {
        "kind": "Vendor advisory",
        "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-w5px-w97v-c3hj"
      }
    ]
  },
  "exploit_refs": [],
  "hunt_profile": [],
  "rules": []
}
